- Home
- Products
EZSBC
You have no items in your shopping cart.
Products
25 Item(s)
per page
-
EzSBC1
The EzSBC1 is an ARM based 32-bit single board computer programmed in BASIC and has 128k of program memory and 30k of RAM for the BASIC program 64-bit floating point and 32-bit integer arithmetic right at your fingertips.
$29.95 As low as: $24.95 -
SAMD21G18 Development Board
SAMD21G18 in a 48-pin package 3.3V regulator capable of delivering 300mA 32.768kHz Crystal Red, Green and Blue LED in a space saving package 400mA battery charger for LiPo Cell JST2 LiPo connector Charging LED Cortex/SWD 10-pin debug header On/Off switch Push-Push SD Card socket 34 of the 38 SAMD21G18 IO pins on breadboard friendly connectors$14.95 As low as: $12.95 -
ESP-WROOM-32 Rev 1
ESP-WROOM-32 Rev1 Module$3.95
-
ESP32-01 Breakout and Development Board
ESP32-01 Breakout and Development Board
$9.95 As low as: $8.50 -
PSU2-Adj
Adjustable 1A switch-mode voltage regulator, high-efficiency replacement for three-terminal linear regulators.$6.95 As low as: $5.00 -
PSU7 LM78H05K Replacement
5V 5A switch-mode voltage regulator, high-efficiency replacement for the obsolete LM78H05K. 20V Maximum Input$10.95 As low as: $7.95
-
PSU5a 5V 3A Regulator in TO-220 form Factor
5V 2.5A switch-mode voltage regulator, high-efficiency replacement for the obsolete LM323T. 20V Maximum Input$7.95 As low as: $5.95 -
USB to Serial / UART 5V or 3.3V
USB to Serial / UART 5V or 3.3Vr
$5.95 As low as: $3.95 -
Project Board 1
PB1 is a companion board to the EzSBC1 to provide a number of popular peripherals and a breadboard area for small to medium projects.$59.95
-
ESP8266-07 Breakout and Power Supply Board
ESP8266 WiFi Module Breakout Board with 3.3V Power Supply
$9.95 -
EzSBC2
The EzSBC2 is based on the LPC1347 Cortex M3 CPU with, 8-channel 12-bit ADC, 4 timers. I2C and SPI buses. A standard SWD connector is provided for using debuggers such as the J-Link and uLink-2.
$17.95 -
PSU5 LM323K Replacement
5V 3A switch-mode voltage regulator, high-efficiency replacement for the obsolete LM323K. 20V Maximum Input$8.95 As low as: $6.25
-
LS2 Level Shifter and Buffer
The LS2 is a twelve channel level shifter and buffer. It can convert and buffer 12 digital signals.
$4.95 As low as: $4.45 -
LS1
The LS1 is an eight channel bi-directional level shifter. It can be used to convert I2C Clock and Data lines for up to four I2C buses.
$4.95 As low as: $4.45 -
PSU2-3.3
3.3V 1A switch-mode voltage regulator, high-efficiency replacement for three-terminal linear regulators.$6.95 As low as: $5.00
-
PSU6 LM7812K Replacement
12V 1A switch-mode voltage regulator, high-efficiency replacement for the obsolete LM7812K. 40V Maximum Input$6.95 As low as: $5.95 -
PSU2-5
5V 1A switch-mode voltage regulator, high-efficiency replacement for three-terminal linear regulators.$6.95 As low as: $5.00 -
PSU3-12
12V 1A switch-mode voltage regulator, high-efficiency replacement for three-terminal linear regulators. 40V Maximum Input$6.95 As low as: $4.95
-
PSU3-5
5V 1A switch-mode voltage regulator, high-efficiency replacement for three-terminal linear regulators. 40V Maximum Input$6.95 As low as: $4.95 -
Small Breadboard
Small breadboard with 170 tie points, self-adhesive backing, white.$2.95 -
9V, 1A adapter
Mains to DC 9V, 1A adapter. Suitable for Project Board power supply. USA mains plug only.$5.95
-
LCD 5110
84x48 Pixel graphical LCD as used in Nokia 5110 with white backlight$4.95 -
HC SR04 Ultrasonic Distance Sensor
The HC SR04 Ultrasonic Distance Sensor sensor is a low cost, easy to use range finder.$4.95 As low as: $3.95 -
DHT11 Digital Temperature and Humidity Sensor
The DHT11 is a low cost digital Humidity and Temperature Sensor.$4.95
-
Jumper Wires F-F
Female to Female jumper wires designed to fit on 0.1" header-style connector pins. Ideal for use on the Project Board 1. 20cm, 8" in length. Sold in bundles of 10 wires.$3.95
25 Item(s)
per page
You have no items in your shopping cart.
Categories
Follow Us
Terms of use - Privacy Policy - Copyright © ezsbc.com