ESP32_Bat Battery Charging Breakout and Development Board with 1000mAh LiPo Cell

ESP32U Dev Board WiFi+Bluetooth with Onboard LiPo Charger, CP2104 USB to Serial with 1000mAh LiPo Cell. Arduino Programmable.  Designed and Made in the USA

This product is for sale in the USA only.

The listing is for the ESP32 development board with integrated LiPo cell charger with a matching 1000mAh cell.

The cell dimesnions are 60mm long, 34mm wide, 5.0mm thick.  The wires are 50mm long.

The cell dimesnions are 2.0″ long, 1.3″ wide, 0.225″ thick.  The wires are 2″ long.

The connector is a JST-2R to match the PCB.

The cell capacity is shown for two cells charged from the ESP32’s charger circuit.  The discharge current is set to 50mA continuous and the cutoff voltage is set to 3.2V.  The cells consistently exceed 1000mAh from the on board charger.